https://www.miningweekly.com
Africa|Construction|Cyclones|drives|Efficiency|Energy|Flow|Innovation|Mineral Processing|Mining|Power|Pumps|Rubber|Service|Slurry|Technology|Training|Valves|Equipment|Flow|Products|Operations
Africa|Construction|Cyclones|drives|Efficiency|Energy|Flow|Innovation|Mineral Processing|Mining|Power|Pumps|Rubber|Service|Slurry|Technology|Training|Valves|Equipment|Flow|Products|Operations
africa|construction|cyclones|drives|efficiency|energy|flow-company|innovation|mineral-processing|mining|power|pumps|rubber|service|slurry|technology|training|valves|equipment|flow-industry-term|products|operations

KREBS® pumps support mine's efficiency drive

A KREBS® slurryMAX™ high pressure tailings pump on a mobile skid

Final adjustments on a KREBS® gravelMAX™ pump

24th May 2023

     

Font size: - +

This article has been supplied as a media statement and is not written by Creamer Media. It may be available only for a limited time on this website.

In the mining industry’s drive to conserve energy, a focus on pumps is essential, especially given the sheer scale of pumping equipment required on the average mine and mineral processing plant.

On this score, global minerals process specialist FLSmidth has allowed mines to achieve new levels of efficiency with the initially patented wear ring technology on its KREBS pumps, according to Stephan Kruger, FLSmidth’s Vice President Pumps, Cyclones and Valves for Sub-Saharan Africa, Middle East and South Asia. Mines have seen significant efficiency gains by using KREBS pumps, explains Kruger, resulting in considerable bottom line impacts when multiplied by the dozens or even hundreds of pumps often employed on a single mine site.

“It is not only the rising cost of electricity that drives mines’ energy strategies, but also their commitment to a low carbon future,” he says. “FLSmidth’s KREBS pumps directly support these efforts by our mining customers, thanks in great part to our innovative wear ring technology.”

He highlights that two key aspects that reduce efficiency in slurry pumps tend to be suction side recirculation and mechanical grinding between the casing and the impeller. The wear ring significantly reduces both of these factors, leading to lower power draw and longer pump life.

“Through our case studies, we have seen power draw being cut by 5 to 10% for the same flow and head with the application of KREBS pumps,” he points out. “Similarly, we have measured the impact on pump life, and have shown that the life of wet end parts can be lengthened by one and a half to two times.”

According to Derek Lane, General Manager Operations, conventional products in the market solve only one of these factors through impeller and liner adjustment which may reduce recirculation but simultaneously exacerbates the grinding. “This leaves the pump user having to compromise on efficiency, which we do not expect our customers to do,” Lane explains.

He says adjusting the wear ring allows the speed of the pump to be maintained as a constant, rather than users having to speed up the pump in response to the impact of grinding and wear. The wear ring in KREBS pumps can be easily adjusted so that it continues drawing the same power for the required pressure, holding energy consumption to a minimum.

The regular adjustment of KREBS pumps can also be done without shutting down the pump and disrupting operations, says Morne Potgieter, FLSmidth Sales Manager Pumps, Cyclones and Valves for Central and Southern Africa. This is important as it contributes to the general continuity – and hence efficiency – of the whole operation.

“The wear ring can be simply adjusted by hand while the pump is running, and without the use of any special tools,” he notes. “This allows the gaps to be kept as small as possible to avoid recirculation inside the pump, while maintaining speed and pressure.”

FLSmidth makes the most of this technological innovation through its skilled field service teams and training offerings, which ensure that customers understand and apply the wear ring adjustment to best effect. Potgieter says the training leaves on-mine operators more comfortable with the task of adjustment, even if many of them may be hesitant about working on rotating machinery.

“We also do extensive technical training with customers on aspects such as pump assemblies, and make sure that we are available when they need us,” he says.

The life of KREBS pumps is further enhanced by the range of materials of construction available to suit the application, says Kruger. “The choice of material is based on the application requirements and in particular minimising wear. There are a number of factors considered which determine the material of construction such as pump size, impeller size and tip speed as well as slurry hardness.”.

Materials used in the construction of slurry pumps are classified into two main types: metals and elastomers. For metal pumps high-chrome alloys, hypereutectic alloys, hypoeutectic alloys and stainless steels are commonly used. Elastomers options vary between natural rubber, polyurethane and synthetics such as neoprene.

He emphasises that the application of these materials makes their own contribution to the mining sector’s sustainability agenda, by reducing the level of scrap produced due to equipment replacement.

Edited by Creamer Media Reporter

Comments

Showroom

Booyco Electronics
Booyco Electronics

Booyco Electronics, South African pioneer of Proximity Detection Systems, offers safety solutions for underground and surface mining, quarrying,...

VISIT SHOWROOM 
SAIMC (Society for Automation, Instrumentation, Mechatronics and Control)
SAIMC (Society for Automation, Instrumentation, Mechatronics and Control)

Education: Consulting with member companies to obtain the optimal benefits from their B-BBEE spending, skills resources as well as B-BBEE points

VISIT SHOWROOM 

Latest Multimedia

sponsored by

Hyphen, Eva mine, ferrochrome price make headlines
Hyphen, Eva mine, ferrochrome price make headlines
27th March 2024
Resources Watch
Resources Watch
27th March 2024

Option 1 (equivalent of R125 a month):

Receive a weekly copy of Creamer Media's Engineering News & Mining Weekly magazine
(print copy for those in South Africa and e-magazine for those outside of South Africa)
Receive daily email newsletters
Access to full search results
Access archive of magazine back copies
Access to Projects in Progress
Access to ONE Research Report of your choice in PDF format

Option 2 (equivalent of R375 a month):

All benefits from Option 1
PLUS
Access to Creamer Media's Research Channel Africa for ALL Research Reports, in PDF format, on various industrial and mining sectors including Electricity; Water; Energy Transition; Hydrogen; Roads, Rail and Ports; Coal; Gold; Platinum; Battery Metals; etc.

Already a subscriber?

Forgotten your password?

MAGAZINE & ONLINE

SUBSCRIBE

RESEARCH CHANNEL AFRICA

SUBSCRIBE

CORPORATE PACKAGES

CLICK FOR A QUOTATION







sq:0.081 0.115s - 94pq - 2rq
Subscribe Now